Hobby Boss 80131 German Panzerkampfwagen IV Ausf B 1/35
The “Panzerkampfwagen IV” was developed as a 20-ton class medium support tank by Krupp-Grusion and over 12,000 units of “Pz.Kpfw. IV” were produced from October 1937 to the end of the war as a prime tank.
Panzerkampfwagen IV Ausf.B (Vs.Kfz.622) were produced using (2.Serie/B.W.) Fgst.Nr.80201 – 80242. Only 42 of Panzerkampfwagen IV Ausf.B were completed from April to September 1938. As with the Ausf.A through E were armed with a short 7.5cm tank gun and MG34 in the turret. In the Ausf.B and C, a vision port and a pistol port replaced the machine gun and its ball mount in the superstructure front plate. The superstructure front plate was made from a single straight plate with the driver’s visor, radio operator’s visor in the same flat plane. An outer armored mantle was bolted to the turret front plate of the Ausf.B & C, over the internal gun mantle, covering the gaps between the internal gun mantle and the front wall of the turret. In the Ausf.B and C cooling air intake and exhaust vents, three parallel horizontal louvers and two vertical supports were designed to retard projectiles and bullet splash entering the engine compartment.
| Item No | 80131 |
| Item Name | German Panzerkampfwagen IV Ausf B |
| Bar Code | 6939319201317 |
| Scale | 1:35 |
| Item Type | Static kit |
| Model Dimension | Length: mm Width: mm Height: mm |
| Total Sprues | 49 sprues , lower hull and turret |
| Metal Parts | copper cable |
| Photo Etched Parts | 1 piece |
| Product Name | Hobby Boss 80131 German Panzerkampfwagen IV Ausf B 1/35 | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Description | The “Panzerkampfwagen IV” was developed as a 20-ton class medium support tank by Krupp-Grusion and over 12,000 units of “Pz.Kpfw. IV” were produced from October 1937 to the end of the war as a prime tank.
Panzerkampfwagen IV Ausf.B (Vs.Kfz.622) were produced using (2.Serie/B.W.) Fgst.Nr.80201 – 80242. Only 42 of Panzerkampfwagen IV Ausf.B were completed from April to September 1938. As with the Ausf.A through E were armed with a short 7.5cm tank gun and MG34 in the turret. In the Ausf.B and C, a vision port and a pistol port replaced the machine gun and its ball mount in the superstructure front plate. The superstructure front plate was made from a single straight plate with the driver’s visor, radio operator’s visor in the same flat plane. An outer armored mantle was bolted to the turret front plate of the Ausf.B & C, over the internal gun mantle, covering the gaps between the internal gun mantle and the front wall of the turret. In the Ausf.B and C cooling air intake and exhaust vents, three parallel horizontal louvers and two vertical supports were designed to retard projectiles and bullet splash entering the engine compartment.
|
||||||||||||||||||
| SKU | hb80131 | ||||||||||||||||||
| Weight (lbs) | 4.000000 |