SGP Reactor Dual Voltage Regulator 5.2v/5.6v
AUD $149.00
In stock
SKU
sgp-sgh5256
Your
helicopter radio system begs for more power each time you fly. The SGP
Reactor was designed for Extreme RC helicopter flying. Did you know that
Digital Servos can draw more than 2A each! Some helis we tested can
draw more than 8A continuous during extreme 3D!! Just think how much
power is trying to go through that wimpy connector when you put your
heli through its paces! This unique dual regulator supplies direct power
through heavy duty connectors and wires . Reactor offers more power and
safer operation than any other power system. Combine the REACTOR with a
Li-Poly battery and fly all day without charging You’ll be amazed at
how your heli can really react!
Reactor supplies Direct power to the swash plate servos. The faster servo response and more available current give your helicopter a whole new feel- and it's the same feel flight after flight
Remaining servos, gyro and accessories plug into the receiver and run at a constant 5.2 volts. Gyro and high speed tail servos perform better at this constant voltage and have longer lifespan compared to over-voltage on other regulator systems
What makes the REACTOR Different from other Voltage Regulators?
- Works with JR, Futaba, Airtronics, Hitec and other radio systems
- More power to all servos, holding power, and speed you can feel
- Dual Voltage high current output tuned specifically for: (A)swashplate servos and (B)gyro/tail rotor servo/RX (safe voltage for gyros and ultra fast tail servos)
- Plug-and-Fly installation with ZERO setup required
- 5.6 volt, 7.5 amp direct power bus for three high-drain swashplate servos
- 5.2 volt, 5 amp supply power to the receiver/gyro/remaining servos
- Heavy Duty 16 gauge wire with low-loss, Deans Ultra connectors
- Heavy Duty charge lead for in-model, high-amp fast charging
- ON/OFF switch compatible with your existing switch harness
- Switch fail-safe reverts to system ON in event of unplugged switch, or switch failure
- Power supplied directly to servos and receiver through multiple redundant connections suited for safe high current operation
- Accepts 7.4V Li-Po/Li-Ion (2S2P/2S) packs, or 6 Cell 7.2V Ni-Cad/Ni-MH
- The ONLY regulator that can actually supply the power demanded by digital servos and extreme flying styles
Reactor supplies Direct power to the swash plate servos. The faster servo response and more available current give your helicopter a whole new feel- and it's the same feel flight after flight
Remaining servos, gyro and accessories plug into the receiver and run at a constant 5.2 volts. Gyro and high speed tail servos perform better at this constant voltage and have longer lifespan compared to over-voltage on other regulator systems
What makes the REACTOR Different from other Voltage Regulators?
- Works with JR, Futaba, Airtronics, Hitec and other radio systems
- More power to all servos, holding power, and speed you can feel
- Dual Voltage high current output tuned specifically for: (A)swashplate servos and (B)gyro/tail rotor servo/RX (safe voltage for gyros and ultra fast tail servos)
- Plug-and-Fly installation with ZERO setup required
- 5.6 volt, 7.5 amp direct power bus for three high-drain swashplate servos
- 5.2 volt, 5 amp supply power to the receiver/gyro/remaining servos
- Heavy Duty 16 gauge wire with low-loss, Deans Ultra connectors
- Heavy Duty charge lead for in-model, high-amp fast charging
- ON/OFF switch compatible with your existing switch harness
- Switch fail-safe reverts to system ON in event of unplugged switch, or switch failure
- Power supplied directly to servos and receiver through multiple redundant connections suited for safe high current operation
- Accepts 7.4V Li-Po/Li-Ion (2S2P/2S) packs, or 6 Cell 7.2V Ni-Cad/Ni-MH
- The ONLY regulator that can actually supply the power demanded by digital servos and extreme flying styles
| Product Name | SGP Reactor Dual Voltage Regulator 5.2v/5.6v |
|---|---|
| Description |
Your
helicopter radio system begs for more power each time you fly. The SGP
Reactor was designed for Extreme RC helicopter flying. Did you know that
Digital Servos can draw more than 2A each! Some helis we tested can
draw more than 8A continuous during extreme 3D!! Just think how much
power is trying to go through that wimpy connector when you put your
heli through its paces! This unique dual regulator supplies direct power
through heavy duty connectors and wires . Reactor offers more power and
safer operation than any other power system. Combine the REACTOR with a
Li-Poly battery and fly all day without charging You’ll be amazed at
how your heli can really react! Reactor supplies Direct power to the swash plate servos. The faster servo response and more available current give your helicopter a whole new feel- and it's the same feel flight after flight Remaining servos, gyro and accessories plug into the receiver and run at a constant 5.2 volts. Gyro and high speed tail servos perform better at this constant voltage and have longer lifespan compared to over-voltage on other regulator systems What makes the REACTOR Different from other Voltage Regulators? - Works with JR, Futaba, Airtronics, Hitec and other radio systems - More power to all servos, holding power, and speed you can feel - Dual Voltage high current output tuned specifically for: (A)swashplate servos and (B)gyro/tail rotor servo/RX (safe voltage for gyros and ultra fast tail servos) - Plug-and-Fly installation with ZERO setup required - 5.6 volt, 7.5 amp direct power bus for three high-drain swashplate servos - 5.2 volt, 5 amp supply power to the receiver/gyro/remaining servos - Heavy Duty 16 gauge wire with low-loss, Deans Ultra connectors - Heavy Duty charge lead for in-model, high-amp fast charging - ON/OFF switch compatible with your existing switch harness - Switch fail-safe reverts to system ON in event of unplugged switch, or switch failure - Power supplied directly to servos and receiver through multiple redundant connections suited for safe high current operation - Accepts 7.4V Li-Po/Li-Ion (2S2P/2S) packs, or 6 Cell 7.2V Ni-Cad/Ni-MH - The ONLY regulator that can actually supply the power demanded by digital servos and extreme flying styles |
| SKU | sgp-sgh5256 |
| Weight (lbs) | 0.150000 |
Write Your Own Review