- Application Guidelines: 1:6th Scale vehicles weighing up to 25 lbs
- Input Voltage Range: MIN: 2S LiPo, MAX: 8S LiPo (33.6V)
- BEC Specifications: 5.5V to 8.0V adjustable in 0.1V increments (8A peak), default 5.5V
- Running Modes: Sensored, Sensorless and SmartSense™ when paired with a Castle 4-POLE 12-SLOT Sensored Motor.
- Brake: Proportional
- Reversible: Yes but may be disabled for racing.
- On/Off Switch: Yes, waterproof
- Cooling Fan: Yes, factory equipped (40mm), fully removable** (see Product Use Statements below)
- Size (L x W x H): 2.73"" x 2.13"" x 1.85"" (69.5mm x 54.1mm x 47mm)
- Weight (with wires): 5.75 oz. (163 grams)
- Connectors type: 6.5mm female bullets for motor connection
- Items Needed for Operation:
- A high current connector designed for high-powered electric systems, rated for 120+ amps, such as Castle CC Bullet 6.5mm, CC Bullet 8.0mm, or 6.5mm Polarized Castle Connectors, soldered to the battery leads.
- Operating environment: Waterproof design for all weather conditions
- Programmability:
- Fully programmable Castle feature set using the included Castle Link V4 USB adapter and freely downloadable Castle Link 2 Windows™ software, or the Castle Link iOS® or Android® app with B-LINK 2™ Bluetooth™ Adapter (sold separately).
- Waterproof Yes
- Telemetry Capable No
- Data Logging Yes
- Auxilary Wire Yes
- Sensored Capable Yes
- Recon G6 Certified ESC No
- ROAR Certified ESC No
- CRYO-DRIVE Yes
Product Use Statements:
Recommended battery capacity for 1:6th scale vehicles is 5000mah. We recommend using 50C continuous discharge or higher LiPo batteries. Surge ratings should never be used to determine a pack’s suitability for a brushless application. We recommend a high current connector designed for high-powered electric systems, rated for 120+ amps, such as Castle CC Bullet 6.5mm, CC Bullet 8.0mm, or 6.5mm Polarized Castle Connectors. Applying voltages higher than 33.6V will cause irreparable damage to ESC; DO NOT RUN HV CELLS (above 4.2v/cell) WHEN RUNNING AT MAX CELL COUNT (8s). This will exceed the 33.6v rating and will damage the ESC and not be covered by the warranty. Although the Cobra 6 is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC with clean water after exposure to corrosives or dirt. The cooling fan must be removed prior to driving in wet conditions. It is not waterproof. Note: The Cobra 6 is not designed for use in extremely high-speed applications and drag setups, as such the Castle warranty does NOT cover failure when used in high speed or drag applications.
