Castle Creations 010016602 Copperhead 10 4S BL Sensored ESC w/1406-5700kV Motor

ESC Specs

Application Guidelines:   1:10 scale vehicles weighing up to 5 lbs.

Input Voltage Range:      2s-3s

Running Modes:  SMARTSENSE™, Sensored Only and Brushed Motor Operation

Brake:    Proportional

Reversible:    Yes, but may be disabled for racing.

On/Off Switch:    Yes, waterproof

Cooling Fan:

Yes, factory equipped (30mm), fully removable** and includes dual use fan guard (See Operating Use Statements)

Size:     2.19" x 1.39" x 1.33"

Weight (with wires):    70.9 g / 2.50 oz.

Motor Connectors:    4.0mm female bullets for motor connection

Operating environment:

Waterproof design for all weather conditions. Although COPPERHEAD 10 is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind.
**The cooling fan must be removed prior to driving in wet conditions. It is not waterproof.

Programmability:

Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software, or the Castle Link App and a B-LINK Bluetooth Adapter (sold separately).

Telemetry Link Capable:

Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX, T7PX and T7PXR Transmitters.

Motor Specs

Input Voltage Range:    2s-3s

Kv:     5700Kv

Max. RPM:   100,000

Motor Size:     Length: 49.5mm

                     Diameter:   36mm

Shaft Size:     Length: 15mm

                    Diameter: 1/8" (3.17mm)

Weight (w/wires):    197 g / 6.9oz

Mounting Hole Specifications:     M3 @ 25mm

Cooling Fan:     Optional - Coming Soon

Connectors:     4mm male Castle Bullet Connectors

Application Guidelines:

2s-3s on 2WD buggies, stadium trucks and touring cars. 2s on 2WD SCTs

Max. Recommended Vehicle Weight:     5 lbs. ready-to-run

Tech Notes:

Running modes: Sensorless and Sensored
Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments.