Castle Creations 060008700 2028 1100kV Sensored Brushless Motor

AUD $569.00
In stock
SKU
CSE060008700

Specs

Input Voltage Range:     10S MAX
Kv:                               1100
Max. RPM:                     45000
Size:                            
Length:                         4.4" (112.7mm)
Diameter:                      2.2" (56.3mm)
Weight (w/wires):           44 oz./1.25kg
Shaft Size:
Length:                          30mm
Diameter:                        8mm
Mounting Hole Specifications: 4mm @ 30mm
Cooling Fan:                    Available, but not included
Connectors:                    8.0mm male connectors, 250mm sensor wire.
Items Needed for Operation:
                                      Compatible Electronic Speed Control (ESC)
                                      (Recommended ESC(s) below)
Recommended ESC(s):      Mamba XL X, Mamba XLX2
Application Guidelines:
The 2028-1100KV is a water resistant design. The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. We recommend applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments.
Max.                                 Recommended Vehicle Weight:
                                RC vehicles weighing less than 30lbs.
Product Use Statements:
Monitor motor temperatures closely; overheating a motor will cause permanent damage to the magnets. Never exceed 180° F on the the motor or ESC.
Do not use mounting screws that extend more than 5mm into the front of the motor. Using too long of a screw can result in damage to the motor's windings and will not be covered by the warranty.
More Information
Product Name Castle Creations 060008700 2028 1100kV Sensored Brushless Motor
SKU CSE060008700
Weight (lbs) 0.800000
Description

Specs

Input Voltage Range:     10S MAX
Kv:                               1100
Max. RPM:                     45000
Size:                            
Length:                         4.4" (112.7mm)
Diameter:                      2.2" (56.3mm)
Weight (w/wires):           44 oz./1.25kg
Shaft Size:
Length:                          30mm
Diameter:                        8mm
Mounting Hole Specifications: 4mm @ 30mm
Cooling Fan:                    Available, but not included
Connectors:                    8.0mm male connectors, 250mm sensor wire.
Items Needed for Operation:
                                      Compatible Electronic Speed Control (ESC)
                                      (Recommended ESC(s) below)
Recommended ESC(s):      Mamba XL X, Mamba XLX2
Application Guidelines:
The 2028-1100KV is a water resistant design. The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. We recommend applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments.
Max.                                 Recommended Vehicle Weight:
                                RC vehicles weighing less than 30lbs.
Product Use Statements:
Monitor motor temperatures closely; overheating a motor will cause permanent damage to the magnets. Never exceed 180° F on the the motor or ESC.
Do not use mounting screws that extend more than 5mm into the front of the motor. Using too long of a screw can result in damage to the motor's windings and will not be covered by the warranty.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© 2024 Family Land. All Rights Reserved.