HPI 104923 FLUX ALPHASTAR 2350Kv BRUSHLESS MOTOR

2350 rpm/volt / Use with FLUX Q-BASE ESC

The Flux Alphastar 2350Kv Brushless Motor is one-half of the Flux Brushless system that is fitted as standard in the Savage Flux 2350, forming an unstoppable power force for amazing off-road power! The Flux Alphastar 2350 features a 5mm motor shaft it can fit optional pinion gears so you can gear it up for high speed runs, or gear it down a bit for increased acceleration on the track.

#104923 FLUX ALPHASTAR 2350Kv BRUSHLESS MOTOR #104924 FLUX Q-BASE BRUSHLESS ESC

NOTE: Before driving in wet conditions, make sure that other electronics fitted to the vehicle are safe to use (marked as water-resistant or waterproof), or that they are fully enclosed and protected from water and moisture (such as in a sealed receiver/battery case). Fans mounted on speed controllers are not water resistant - we recommend to disconnect the fan from the ESC before driving in wet conditions and allow it to dry fully before reconnecting the fan power. Lubricate exposed metal drivetrain parts such as bearings, outdrives and diff shafts before driving in wet conditions. Motors are not intended for submerged use and may be damaged if used when under water. After driving in wet conditions, make sure to rinse off dirt and any corrosive liquids like saltwater with plain water and re-lubricate metal drivetrain parts.